The SBM industrial jaw crusher is based on a revolutionary modular, non-welded frame construction, offering owners the highest possible fatigue strength, excellent reliability and numerous mounting possibilities. Thanks to the accurately balanced structure, the industrial jaw crusher is one of the most easiest and economical crushing machine to install. Combined with special high-quality cast steel components and durable wear parts, means exceptionally high crusher availability, cost-efficient crushing and low cost per ton. In all, SBM industrial jaw crusher has simple structure, which bring about easy maintenance; stable performance; even final particles and high crushing ratio.
The motor of SBM industrial jaw crusher machine drives the belt wheel. And makes movable jaw up and down by eccentric shaft. When the movable jaw down, the angle between the fixed jaw and movable jaw gets smaller, and the materials can be crushed to reach the crushing target. When the movable jaw rises, it leaves the fixed jaw plate under the function of drawbar and spring, then the crushed materials are discharged from the lower outlet of crushing cavity.
How does CS Series Cone Crusher work
Cone crusher crushes materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency than ordinary rock crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing.
The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size of the rock crusher is determined adjusted.
