Sand Washer Overview
Bucket wheel sand washing machine is the most widely used washing machines of SBM Machinery which are used with sand making machine. Compared to Spiral Sand Washing Machine , it has the characteristics of low energy consumption , large processing volume, high cleaning, reasonable structure, the failure rate is low, which can make the final product reaches to the national standards and is the best choice to upgrade for sand washing machine industry.
Sand Washer Application
Sand washing machine is used to building site, gravel factories, hydropower station and concrete dam site, glass factory quarry, minerals, building materials, transportation, chemical industry, water conservation and cement mixture station and so on.
Working Principle
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder.
Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Sand Washer Features
1. Simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoid in a large degree that the bearings are damaged by being soaked with water, sand or some polluted things.
2. Being used for cleaning sand in quarries, it has many advantages compared with traditional spiral sand washing machine.
3. There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction.
4. There are no other wear parts except the screen mesh.
5. It has longer service life and lower maintenance frequency.Sand Washing Machine
Model XSD2610 XSD3016 XSD3620 Spec. of Impeller(mm) Φ2600×1000 Φ3000×1600 Φ3600×2000 Impeller Speed(r/min) 1.178 1.179 1.180 Capacity(t/h) 20-50 50-120 120-180 Input Size(mm) ≤10 ≤10 ≤10 Weight(t) 2.68 3.26 4.3 Motor Power(kw) 7.5 15 18.5 Overall Dimension(mm); (LxWxH) 3320x2125x2670 3810x2686x3085 4500x3206x3480
Note: This specification is just reference, any changes are subject to the sand washing machine products.