Vibrating Feeder
Vibrating feeder is also named vibrate feeding machine. Our company produces the GZD series vibrating feeder engine, it is specially a new vibration feeding engine designs for the thick breaker even transports bulk material before the stave screening. This machine uses the double eccentric shaft driver, guarantees that the equipment can withstand impact that the bulk material whereabouts, the material ability is big. In the production process, it can give the massive and granulated material to the expected installment from store in the bunker even, fixed time, and continuously.
In the grit production line it may evenly feed for the crusher, and carries on the coarse fraction to the material, thus prevents the phenomenon which feeds unevenly produces halts of the expect installment. And it lengthened the useful life of equipment. The feeding engine is divided into the steel plate structure and the grid structure, the steel plate structure feeding engine is used in the granulated substance stone material production line, sends the material into in the detritus equipment evenly and completely.
The grid structure's feeding engine may carry on the coarse fraction to the material, causes the system to be more economical and reasonable in the configuration, and has taken the essential equipment in the stave screening. It is widely used to match the crushing and sieving equipments in many industries including metallurgy, coal mine, mineral dressing, building material, chemical, grinding, etc.
Working Principle
Vibrating Feeder produced centrifugal force by using of the eccentric block in the vibrators, which make some moving parts such as screen and vibrators to make a mandatory consecutive round or nearly round sports. Materials make a continuous throwing movement on the sieve screen surface and sent the material to the mouth continuous.
Feeder Characters
Simple structure, smooth ,uniform feeding, continuous performance, exciting force adjustable, be changed and control at any time , easy to operate; Low noise, low power consumption, adjusting performance, non-washed material phenomena. If use a closed fuselage, it can prevent dust pollution. Electromagnetic vibrating feeder is used to make material supply to the affected material devices equably or quantification ally from the storage silo or other storage device, is essential for the implementation of automated assembly line equipment. There are two kinds , open or closed.
Electromagnetic vibrating feeder structure is simple and easy to operate, without Run-oriented, low power consumption; you can even adjust the volume to the ore; so it is widely used, but generally used in loose materials. According to equipment performance requirements, the machine designed should minimize the pressure which material produced to the tank. According to manufacturer requirements, the mouth of the storage should not be greater a quarter of the slot width, the rate of the material should be controlled between 6 min to 8min .Nesting at bottom of the silo should be set high enough intercept mineral board.
For the purpose of not affecting the performance, intercept mineral board shall not be fixed to the plate on the tank. To enable a smooth discharge silo, the inclination of silo posterior is best between 55-65 degrees.Vibrating Feeder Data
Model Max input size(mm) capacity
(t/h)motor power
(kw)Installaition Slope weight
(kg)Size of Funnel
(mm)Overall Dimension
(L×W×H)(mm)GZD-180×80 300 30-80 2×1.5 0-10 0.8 1800×800 2200×1100×800 GZD-200×120 300 80-500 2×2.2 0-10 0.9 2000×1200 2000×1200×855 GZD-300×90 300 40-100 2×2.2 0-10 1.5 3000×900 3050×1430×1550 ZSW-380×96 500 90-200 11 0° 3.98 3800×960 3882×2224×2121 ZSW-420×110 580 150-350 15 0° 5.0 4200×1100 4250×2500×1365 ZSW-490×110 580 180-380 15 0° 5.32 4900×1100 4957×2500×1365 ZSW-490×130 750 250-450 22 0° 5.9 4900×1300 4957×2580×2083 ZSW-600×130 750 450-800 50 0° 7.8 6000×1300 6082×2580×2083 ZSW-600×150 800 600-1000 30 0° 8.67 6000×1500 6082×2660×2400