Vibrating Feeder

Vibrating Feeder is a kind of linear direction feeding equipment.Our vibrating feeder is designed and built to withstand the toughest work in a quarry or mine by matching different applications; This vibrating feeder series is designed particularly for continuous use with any hard and abrasive materials through uniform flow. Vibrating feeder works to continuously and evenly feed lump, particle and powdered materials from hopper to belt conveyer, bucket elevator, screens and crushing machines, etc. Step less regulation is available for SBM’s vibrating feeder to automatically and centrally control the feeding volume.
Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign.

Vibrating Feeder can continuously and evenly send materials to crusher and roughly screen them. It matches crushing and screening machines in many areas such as metallurgical industry, coal mining, mining-selecting, building ,chemical and grinding industry, etc.

1. Our vibrating feeder is of highest capacity for the same deck size in industry
2. Sub-resonance tuning to guarantee efficient, continued operation as deck liners wear
3. simple structure, easy to adjust and to maintain.
4. Infinite variety of sizes and custom configurations, typically up to 600 t/h to suit your requirement
5. Our vibrating feeder is added closed frame, it can largely reduce pollution and noise.

Vibrating feeder working principle as follows: Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, The materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, avoiding the further crushing, so screening purpose of vibrating feeder can be reached.

Model	Max input size(mm)	capacity (t/h)	motor power (kw)	Installaition Slope	weight (kg)	Size of Funnel (mm)
GZD-180×80	300	30-80	2×1.5	0-10	0.8	1800×800
GZD-300×90	500	40-100	2×2.2	0-10	1.5	3000×900
ZSW-380×96	500	90-100	11	0°	3.98	3800×960
ZSW-490×96	500	120-240	15	0°	5.5	4900×960
ZSW-490×110	580	120-280	15	0°	5.72	4900×1100
ZSW-590×110	600	280-500	22	0°	6.13	5900×1100
ZSW-600×130	750	400-560	22	0°	7.8	6000×1300

Note: This specification is just reference, any changes are subject to the Vibrating Feeder products.

Usually check the amplitude of vibration motors. Once discover the unusual circumstances, should be immediately shut down the vibrating feeder. This is because the vibration of the motor current and the temperature of surface required uniform, do not put so rocking. Motor bearings are the broken line in the mouth Feeder critical equipment, that is why its maintenance is also particularly important.In the normal case, fill oil every 2 months. In the high-temperature season, fill oil every month. The motor must be renewed every six month and also to replace the internal bearings.